You are not logged in.

Manual water mode won't start

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Moggie

Starting Member

Posts: 1

1

Saturday, June 4th 2011, 10:48am

Manual water mode won't start

I wanted to water one zone and I set the dial to run and it flashes for a second then goes back to display the time. I tried this numerous times and once I hear the sprinkler heads pop up trying to run but then the display reverts out of "running" mode. It was working fine this past week. I tried it to run it on manual for all zones and it does the same thing. I'm wondering if there is short in the wiring. Thank-you

Mitchgo

Supreme Member

Posts: 502

Location: Seattle

2

Sunday, June 5th 2011, 1:28pm

what kind of controller?

Some do tend to get funky like that. Usually you just keep fiddling with it and it will work, or pressing the buttons down a little harder.

Maybe it's time for a replacement?

Similar threads

Rate this thread