Hunter SRC Controller Locked in Off Mode

ddeferra

New Member

Posts: 2

Tuesday, June 7th 2011, 10:46pm

Hunter SRC Controller Locked in Off Mode

I have a Hunter SRC controller. It worked last summer and over the winter when I went to turn it on the read-out only was in the Off mode. I can not program anything on the controller. I've tried to unplug it and then plug it back in without any change.

Go to the top of the page
Quote

mrfixit

Moderator

Posts: 1,510

Location: USA

Wednesday, June 8th 2011, 2:05am

Did you take the back up battery out when you unplugged it?

---

This came out of the manual for the SRC Plus. lol at the size of the font. Best I could do.

Clearing the Controller's Memory/ Resetting the Controller

If you feel you have misprogrammed the controller, there is a process

that will reset the memory to factory defaults and erase all programs and

data that has been entered into the controller.

1. Press and hold down the , and buttons.

2. Press and release the reset button in the lower wiring compartment.

3. Release the , and buttons. The display should now show

12:00AM. All the memory has been cleared and the controller may

now be reprogrammed.

This post has been edited 1 times, last edit by "mrfixit" (Jun 8th 2011, 2:19am)