Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
you think you are starting a station, or a zone, but you are not ~ you are starting a program ~ one start time is all that is needed to have every station in the program to run in sequence
Only 1 Program and ONLY 1 start time.
It goes like
Program A> Start time 1 > Zone run time - If all zones have minutes inputed into Program A then start time 1 will run through all the zones. So if each zone is set for 10 minutes. Start time 1 will start up zone 1- run for 10 min, then zone 2- run for 10 min, zone 3 - run for 10 min and zone 4. Then the system will stop.
If you use start time 2 , 3 and 4 and will do the exact same thing. As well as the controller has stackable start times. So if you have 4 start times all at 4 am. with all zones running 10 minute. Start time 1 will finish with a total run time of 40 minutes. Then it reverts back to Start time 2- with another 40 minutes of run time and so on
Program A) Zone run times
Start Time 1)
Start Time 2)
Start Time 3)
Start Time 4)
Program B ) Zone run times
Start time )1 And so on...