You are not logged in.

2 zones not working in between working zones

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

khh

Starting Member

Posts: 1

1

Wednesday, June 22nd 2011, 8:49pm

2 zones not working in between working zones

I have a 9 zone system and zone 2 and 6 aren't working. However, the rest of the zones work. I thought it was the valves so I tried to replace them first. I hooked them up to the controller and they opened, but when I went to the valves and connected them to the existing wiring they weren't receiving any power. Any suggestions. I don't know if this matters or not, but zones 1-5 are original and several years back the previous home owner added zones 6-9 and it was tied into the existing wiring.

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Thursday, June 23rd 2011, 8:33am

do some electrical testing - bad wiring causes a lot of these problems

Similar threads

Rate this thread