Station 2 does not work
Hello,
New to this forum so I will try and be as detailed and short as possible. I have a 6 zone system and zone number 2 is out.
Here are the facts:
1) The solenoid is good, I have tested it on other stations and it is new.
2) The valve works manually.
3) Port number 2 in the main box works. I know this because I put other wires from other ports into this port and those stations all came on.
I have two questions:
1) Even though the valve on station number 2 turns on manually, could it be causing the problem and still need to be replaced?
2)There are two wires that connect station to station, one red and one white. Since station 2 is in the middle of other stations (and those stations all work) I would assume that the wires have electricity running through them and therefor it would not be an issue of a cut wire. Am I wrong?
Any help is greatly appreciated!