You are not logged in.

X-Core controller start times keep resetting to "Off"

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

hudr0004

New Member

Posts: 3

1

Monday, September 12th 2011, 10:16am

X-Core controller start times keep resetting to "Off"

I installed an X-Core controller and programmed it to run program A at 6:00 a.m. and 6:00 p.m. - and it will run that successfully one time. When I come back the next day all of the start times are set to "Off". I have the Date/Time settings all correct and I have it set to run every day of the week with no intervals inbetween. Still it seems like every night at midnight, the controller resets to start times to "off" - anyone have similar issues or any thoughts?



Thanks

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Monday, September 12th 2011, 2:14pm

Reset the controller and start over from scratch.

hudr0004

New Member

Posts: 3

3

Thursday, October 20th 2011, 12:40pm

I tried a complete reset with no luck. I've since had another controller sent to me in case there was a defect but have had the exact same problem. I'm correctly setting it up to run but the start times get wiped off overnight. Anyone have any thoughts?

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

4

Thursday, October 20th 2011, 9:32pm

Reset the controller to the factory default. That probably gives you start time A1 at 8 AM, for 10 minutes per zone. Modify that program as needed. Do nothing else. Do not add any start times for now.

hudr0004

New Member

Posts: 3

5

Monday, October 24th 2011, 8:38am

Thanks for the help. I emailed Hunter directly and they walked me thru the wiring - it had been wired incorrectly which was allowing it to work - but erasing the programs each day.

Similar threads

Rate this thread