You are not logged in.

finding answer to wiring problem

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Pager

Starting Member

Posts: 1

1

Thursday, September 22nd 2011, 9:34pm

finding answer to wiring problem

My rainbird esp-m sprinkler runs, I measure 28 volts at the box in the stations but no voltage is getting to the valves? In fact when I turn on station one or two or three I get 28 volts on all 6 stations. When I disconnect the wires from the terminals I get the proper voltage on the prober station. Where is the most likely place the wires are fused together? or could there be something else. One station, valve is under water most of the time or maybe lighting has fused all the wires together. I don't know where to look first.



Pager

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Friday, September 23rd 2011, 9:53am

Measure resistances of the zone wiring.

Similar threads

Rate this thread