You are not logged in.

Program settings lost after power failure

RC

Unregistered

1

Sunday, November 6th 2011, 7:46pm

Program settings lost after power failure

I have a Pro-c controller. After a power failure the progrmed settings go crazy and must reprogram.
Is there any fix for this? I would like for it to resume with out having to reprogram run times.

mrfixit

Moderator

Posts: 1,510

Location: USA

2

Sunday, November 6th 2011, 8:46pm

I don't know how old your controller is but Hunter claims all their controllers have a non-volatile memory. Which means the controller retains the programming forever even without power. I'm not even sure when Hunter incorporated this feature.

Try taking out the back up battery and unplug the controller for a couple of minutes. See if that resets your programming back to where it was.



www.hunterindustries.com/Products/Controllers/procfb.html

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

3

Monday, November 7th 2011, 7:57am

Older SRC controllers needed a backup battery to retain programming - maybe old Pro-C controllers are the same - in any event, keep a fresh backup battery installed in the controller, and don't unplug it in the winter

Similar threads

Rate this thread