You are not logged in.

Richdel 216PR Solenoid Valve Parts

magicm1ke

New Member

Posts: 2

1

Sunday, January 15th 2012, 9:13am

Richdel 216PR Solenoid Valve Parts

Guys,
I am looking for a replacement cover for a Richdel 216PR. Is is possible or too old? The threads for solenoid are stripped. Maybe a solenoid also. The Richdel is black and 10 screws hold cover on.

Thanks

Mike

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Sunday, January 15th 2012, 3:02pm

Valve bonnets are not commonly stocked as repair items. Here is your valve.

magicm1ke

New Member

Posts: 2

3

Sunday, January 15th 2012, 5:40pm

Thx

mrfixit

Moderator

Posts: 1,510

Location: USA

4

Monday, January 16th 2012, 1:32am

Here's a hydraulic 216. I don't know if the solenoid will go in there or not. Boots might know.

www.ebay.com/itm/NOS-Richdel-R-216HYD-1-1-2-Professional-Irrigation-Sprinkler-Valve-AWESOME-/320822743894?pt=LH_DefaultDomain_0&hash=item4ab2869356

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

5

Tuesday, January 17th 2012, 8:17pm

Stick with the modern replacement

Trev

Starting Member

Posts: 1

6

Monday, August 13th 2012, 6:37pm

RE: Richdel 216PR Solenoid Valve Parts

Quoted from "magicm1ke"


Further to post below.

I've just bought a replacement solenoid for my RICHDEL 216PR with a P/N R811-24VACG which I was assured would fit the 'old' Richdel valve.

On close inspection the thread on the new solenoid is finer than the original burnt out solenoid.

Does anyone have a source for a solenoid with the the original course thread??



Trev





"Guys,
I am looking for a replacement cover for a Richdel 216PR. Is is possible or too old? The threads for solenoid are stripped. Maybe a solenoid also. The Richdel is black and 10 screws hold cover on.

Thanks

Mike"

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

7

Monday, August 13th 2012, 7:32pm

any Richdel valve used a standard solenoid denoted by the thread size "3/4 x 20" - that means 20 threads per inch

You might be looking at a manual-operation piece that is threaded on the old solenoid, if you see coarser threads.

Similar threads

Rate this thread