You are not logged in.

Rainbird ESPM Controller and Hunter Mini-Clik Sensor Question

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

ros

New Member

Posts: 9

Location: North Coastal, South Carolina

1

Thursday, March 15th 2012, 7:40pm

Rainbird ESPM Controller and Hunter Mini-Clik Sensor Question

I recently installed a Rainbird ESPM controller and a Hunter Mini-Clik rain
sensor wired to the two SEN terminals. Worked like it should when tested by
suppressing the plunger on the top of the rain sensor.

Yesterday I
installed the same set up at another customer. When tested, the watering would
not suspend. I tried another new Mini-Clik and another new ESPM and it still
would not work. Finally I had to just break the common through the Mini-Clik
(the old way) to get it to work.

Any thoughts on why it worked correctly
one time and not the second time?

Thanks / Regards,

Mex

hi.todd

Supreme Member

Posts: 417

Location: Houston, Texas

2

Tuesday, March 20th 2012, 9:07pm

I know this sounds lame, but is there a bypass switch for the rain sensor?

May be it accidentally was in the bypass mode.

I am sure it is something else though.

:thumbsup:
:thumbup: :thumbsup:

Similar threads

Rate this thread