You are not logged in.

How to add more valves when only two wires available?

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

edwildesr

New Member

Posts: 6

Location: Virginia

1

Saturday, May 19th 2012, 6:20pm

How to add more valves when only two wires available?

I need to add some more valves in an area that has only one spare conductor. Is a decoder the answer and will it work with any controller if there is a decoder unit at the start of the wire segment and at the valve end? There are plenty of zones left on the controller (an Irrigation Caddy). What product should I get? Thanks!

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Sunday, May 20th 2012, 12:24pm

If you can't run more wires, then you have to use a coder/decoder arrangement with the one wire

Similar threads

Rate this thread