You are not logged in.

Pro C Controller Rain sensor issue

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Montgomeryc

Starting Member

Posts: 1

1

Wednesday, June 13th 2012, 2:46pm

Pro C Controller Rain sensor issue

I hooked up a rain sensor as per the directions that came with it. It doesn't work. Can anyonme tell me if the controller is looking for a "normally closed", or a "normally open" sensor? The sensor that I installed is a "Normally closed" sensor. This is an existing system that has been operating for years with no sensor at all. I am trying to install an "Orbit" sensor. The cut sheet that came with the sensor says there is a third "normally" open wire but only 2 wires are present. The actual sensor is a "normally closed" switch. It opens when you manually press the spindle at the top of the sensor.

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Wednesday, June 13th 2012, 4:03pm

Make sure you followed the instructions on the Pro-C controller and removed the jumper that's installed on the terminal strip.

Similar threads

Rate this thread