You are not logged in.

Sprinklers start at an unprogrammed time and then again at the programmed time

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

planersedge

Unregistered

1

Wednesday, June 20th 2012, 2:32pm

Sprinklers start at an unprogrammed time and then again at the programmed time

I have my sprinklers programmed to start at 5:00am. They start at about 12:45 am and run a ful cycle and then start again at the prescribed 5"00am start time.

Has anyone else encountered this and what do I do about it?

Thank you.

John

mrfixit

Moderator

Posts: 1,510

Location: USA

2

Wednesday, June 20th 2012, 3:07pm

99% of the time there will be two start times programmed. Check the A B C programs for an extra start time.
If you don't find the problem reset the controller. Take out any back up batteries and unplug for a few minutes.

planersedge

Unregistered

3

Wednesday, June 20th 2012, 4:45pm

Thank you

There was only one start time set. I'll try to "reboot" technique and see if that works. I will report back results.

John

planersedge

Unregistered

4

Monday, June 25th 2012, 7:27am

Thank you

Everything is working fine.

Thank you for the assistance.

Similar threads

Rate this thread