You are not logged in.

rainbird esp-lx

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

m collins

New Member

Posts: 2

1

Thursday, July 5th 2012, 11:04am

rainbird esp-lx

The display window has gone blank. I have reset the box several times and still no display. I have turned the controller off and left it so for several minutes. The modules inside the box are blinking red.

mrfixit

Moderator

Posts: 1,510

Location: USA

2

Thursday, July 5th 2012, 11:13am

Is the outlet the controller's plugged into working? Plug something else into it.

m collins

New Member

Posts: 2

3

Thursday, July 5th 2012, 11:26am

controller

I have power to the unit, have tested with other connections. It was working fine yesterday.

GatorGuy

Moderator

Posts: 458

4

Thursday, July 5th 2012, 12:27pm

From Rain Bird
Display is partially or completely blank.
An electrical surge or lightning strike has damaged the controller’s electronics.
Push the RESET BUTTON.
If the electrical surge did no permanent damage, the controller will accept
programming commands and function normally. If the controller does not operate
properly, contact Rain Bird Technical Assistance at 800-247-3782.

Similar threads

Rate this thread