You are not logged in.

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

11

Tuesday, July 17th 2012, 9:13pm

RE: Myers Shallow Well Jet Pump 28 GPM 1 HP # HJ100S

What is the difference between:

this pump

And

that pump
they are the same pump, but only the first page is showing the correct pump photo (the second page is showing the 1/2 HP pump from the same series)

12

Tuesday, July 17th 2012, 9:55pm

This is the pump you would recommend?

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

13

Wednesday, July 18th 2012, 10:06am

Sight unseen, I don't recommend anything. To run three model 3500 heads, you probably don't need the full output of the HJ100S. I have installed the Myers jet pumps before, so I know they are a reliable product.

here's a question - what's the power to your pump - you do know that a 1HP 'pro' pump is going to pop circuit breakers on a 120-volt line

14

Wednesday, July 18th 2012, 7:03pm

I ran a twelve three electrical line for a 220 hook up.

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

15

Thursday, July 19th 2012, 9:59am

So what are the specs on your 3500 heads? I don't install them (don't install any mini-rotor heads)

Here is another worthy line of jet pumps, the JS series by Goulds. I include this, because I don't see the equivalent info on the Myers website. You may find that a good 1/2 HP jet pump will work after all. Understand, though, that you can't fudge the numbers, and also understand that any pressure losses in the suction pipe plumbing have to be converted to additional suction lift.


Rate this thread