Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Hunter Pro-C automatic timing
I have two Hunter Pro-C controllers. One works perfectly, the other works perfect in every respect except it will not turn on to run the programs. It is as if it is not reading the clock. I've programmed it several times from scratch. It runs from manual correctly in all phases of operation for the correct programmed times on each sprinkler. It just won't automatically start the programs. ?????
Reset the controller. Make sure you take out the back up battery as well.
Look on the back of the faceplate for directions on how to reset the pro-c.
Or look in the manual.
If it still isn't working I'm afraid the controller's fried.
You're positive you have a start time and day of the week programmed?
Its programmed fine in the sense that it is to turn on every work day. I checked it both in the a.m. and p.m. in case I was off 12 hrs, but still nothing. I'll follow the advise to reset the entire thing again and hope for the best. Thanks for your input.
resetting cured the problem. Thanks for the help.
Can you explain how did you reset the system? I have the same exact problem.
Read your instruction manual.