You are not logged in.

Remove and Replace Nozzles in Hunter PGP Rotors

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Curmudgeon10

Starting Member

Posts: 1

1

Monday, September 24th 2012, 2:40pm

Remove and Replace Nozzles in Hunter PGP Rotors

I know how one stalls these in a new head --- no problem. But how do you remove one that is already installed in order to put in a different nozzle? Yes, I can back out the set screw. But then it's difficult to see how to extract the embedded nozzle (without inserting something (what?) in the nozzle hole, if it's big enough and trying to pull it out).

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Tuesday, September 25th 2012, 9:58am

If you want to save the installed nozzle to use later on, you might run the zone with the nozzle screw backed out, and let the water pressure blow it out of the head.

Similar threads

Rate this thread