Hunter pro-c controller problem

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

joe13

New Member

Posts: 3

Wednesday, October 3rd 2012, 3:51pm

Hunter pro-c controller problem

my house took a lighting strike and caused my system to stop working. I replaced the face plate and now the system sporadically recognizes all the zones and sometimes it does not. I have 3 modules inside and I beleive two control 3 zones each and then a larger one that controls 9 zones. It seems that the the module at the bottom works all of the time with the exception of zone 3, and then the second module works all or nothing and the same for the larger module, except it appears that zone 9 and 15 do not work at all. all the sones show up on the faceplate when I program it and they show taht they are working when I run each zone in the manual mode, but no water.
so my question is what do I need to check, test or replace? modules, inner workings, ????
Thanks....Joe