You are not logged in.

wanted: broken bonnets (poppets okay too) from Febco 1" PVB

Hovik

New Member

Posts: 2

Location: Murrka

1

Monday, November 19th 2012, 6:50pm

wanted: broken bonnets (poppets okay too) from Febco 1" PVB

Hi All,
I know this is probably a very strange sounding request but if anyone has broken bonnets from the 765-1 Febco laying around doing nothing I would love to take them off your hands. I am doing a project and need them. The more damaged the better, with o-rings is preferred but not required. cracked, snapped, missing pins or bridge is fine... I can send you payment to cover the freight. Send me a PM if you can help me. Thanks!
H

This post has been edited 1 times, last edit by "Hovik" (Nov 19th 2012, 6:56pm)

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Monday, November 19th 2012, 8:06pm

When you can, let us know what this is all about. You got me curious.

Hovik

New Member

Posts: 2

Location: Murrka

3

Tuesday, November 20th 2012, 11:21pm

Quoted from "Wet_Boots"

When you can, let us know what this is all about. You got me curious.
Will do... Any chance you could spare some?

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

4

Wednesday, November 21st 2012, 10:11am

Probably none to spare (they go into the trash) at this time, at least none that broke by way of freezing water in the PVB.

Do understand that it is intentional that the plastic bonnet breaks during a freeze, because that spares the expensive brass body from damage.

Similar threads

Rate this thread