Correct pressure body for Hunter MP rotators??? - Sprinklers - Rotors and Spray Heads - SPRINKLER TALK FORUM - You Got Questions, We've Got Answers

You are not logged in.

Correct pressure body for Hunter MP rotators???

Reply

New Member

Tuesday, December 11th 2012, 10:36am

Correct pressure body for Hunter MP rotators???

I was looking to buy some MP Rotator heads and the bodies for them and my question is, on the description for the MP Rotator heads it recommends 30 psi but then they show the bodies that go along with the heads are a hunter body that is a 40 psi pressure compensating one? So is it ok to get a 40 psi body or do I need to find another one that is 30 psi?

Thanks!

Reese

Go to the top of the page
Quote

Supreme Member

Location: Northern New Jersey

Tuesday, December 11th 2012, 11:13am

I installed MP rotators and had the same question. I used the body that was recommenced on the specs sheet - either 30 or 40.

Go to the top of the page
Quote

New Member

Tuesday, December 11th 2012, 2:35pm

great, thanks

Go to the top of the page
Quote

Supreme Member

Location: Metro NYC

Tuesday, December 11th 2012, 4:55pm

If you're using the 3000 series, the 40 psi would be better. Remember that there is some distance reduction available with these nozzles.

Go to the top of the page
Quote

Reply

Similar threads

- Sprinklers - Rotors and Spray Heads »
- Hunter MP Rotator side strip problems (Feb 13th 2011, 1:34am)
- Design Issues »
- Help with low pressure design (May 17th 2010, 3:29pm)
- Sprinklers - Rotors and Spray Heads »
- PGP vs MP Rotators (May 2nd 2010, 9:38pm)
- Sprinklers - Rotors and Spray Heads »
- MP Rotator (Jun 7th 2005, 11:47am)