You are not logged in.

Imperial Valet 11 station controller

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

lakebum20

Starting Member

Posts: 1

1

Friday, May 3rd 2013, 4:07pm

Imperial Valet 11 station controller

A friend that I am trying to help has an OLD imperial valet controller with an intake in the lake. when a zone is turned on the I get 24 volts on the common and m terminals, and in about 3-4 seconds the reset button trips. It does this on each zone. Can start the pump at the lake by pressing in the contacts on the pump. Worked fine when winterized. What would cause the reset button to trip? System is probably over 20 years old and probably has the brass valves.

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Friday, May 3rd 2013, 7:04pm

Could be the pump relay is presenting an overload to the controller.

Similar threads

Rate this thread