You are not logged in.

System will not run all programmed zones

Rmiclette

Starting Member

Posts: 1

1

Sunday, May 5th 2013, 6:49am

System will not run all programmed zones

Hello. I recently bought a home with a hunter pro-c controller. I have programmed the sprinkler system to run all six zones at one time. For some reason when the program runs it only runs the first zone. I have reset the controller and re programmed it multiple times but the same thing is happening. Any help would be much appreciated or if you can point me in the direction of a similar discussion thread that would be great.

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Sunday, May 5th 2013, 7:56am

It is not possible to run six zones simultaneously. Go back to your owner's manual and doublecheck every program setting.

Scott76

Active Member

Posts: 46

Location: Kansas City

3

Sunday, May 5th 2013, 11:41am

Try to manually run each zone. If the timer provides an error code that would be really helpful in determining the problem.

Similar threads

Rate this thread