You are not logged in.

Water overflowing out of side of rotor

NABRIL

Active Member

Posts: 31

1

Monday, May 6th 2013, 12:25pm

Water overflowing out of side of rotor

Hello

I replaced a spray head that was in 1 of my zones with a 4 inch rotor to better cover the area. I see that this new rotor, however, has water gushing out of the side of the riser while functioning. It happens to be located at the end of a downward slopping pipe run.

Is the gushing water an idication of too much water pressure for that rotor? Do I ignore it?



Thanks

Scott76

Active Member

Posts: 46

Location: Kansas City

2

Monday, May 6th 2013, 7:51pm

If the water is coming out somewhere other than the nozzle opening then the rotor or riser is bad. Start with the riser, as it's cheaper.

Similar threads

Rate this thread