I want one valve to run each day and the other 2 valves to run every other day. How? I found nothing in the manual covering different zones for different days. They seem to all go on or off any given day.
Can the Programs (A, B, C) cycle each other without manual intervention? That is Pgm A automatically goes to Pgm B and etc?
build your programs, each with a schedule you choose, and assign zone run times for each program - if program A runs every day, and you only want zone 1 to run every day, then only zone 1 will have a run time on program A, and the run time for all the other zones on program A will be zero - if program B runs every other day, you set the program B run time for zone 1 to zero (since it already does what you want on program A)
remember that all the programs are in operation - you don't turn them on or off - you must program days of operation for each program you are using - you program start times for each program you are using - you are never actually commanding a certain zone to start at a certain time on a certain day, as those settings (start times and days of operation) apply to the programs