You are not logged in.

Troubleshooting a hunter Pro-C

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

aadave1

Starting Member

Posts: 1

1

Wednesday, June 5th 2013, 3:53pm

Troubleshooting a hunter Pro-C

I have a Hunter PRO-C that has worked for years. Now it shows that stations are watering but, no water is coming out of the heads. If I manually actuate the valves they work so, I know it's got water. For whatever reason, the controler isn't sending the signal to open the valves. I have tried re-setting the whole system and reprogramed the PRO-C. I have also by-passed the rain sensor. Any ideas as to why it's not working? ?(

Wet_Boots

Supreme Member

Posts: 4,102

Location: Metro NYC

2

Wednesday, June 5th 2013, 4:09pm

Check the electrical health of the wiring with some resistance testing.

mrfixit

Moderator

Posts: 1,514

Location: USA

3

Wednesday, June 5th 2013, 7:17pm

Also make sure the controller isn't running off the back up battery only. Take the battery out for a few minutes. Is the display gone now?
Is the outlet working?
Is there power from the transformer?
Yep could be a broken common wire.

wetlobo

Starting Member

Posts: 1

4

Sunday, June 9th 2013, 4:51pm

do you have master valve on the system

Similar threads

Rate this thread