You are not logged in.

Trouble

Bwilson2

Unregistered

1

Tuesday, August 13th 2013, 10:12pm

Trouble

I have a richdel 508pri/512pri controller that worked fine last year. Upon opening the sprinklers up, I programmed everything as it was last year and now nothing. I can run things manually from the controller but can not eat it to turn on any of the zones. Help!

Bwilson2

Unregistered

2

Tuesday, August 13th 2013, 10:21pm

Crazy thing is that I can put the watering on manually from the controller pad and not even need to go to the valves. Leads me to believe hat it is not electrical but I am not sure and have to be open to it being anything

mrfixit

Moderator

Posts: 1,510

Location: USA

3

Wednesday, August 14th 2013, 12:28pm

Make sure the controller isn't in rain mode.
Check page 13 of the manual

You could try resetting the controller and reprogramming it. Unplug it and take out the battery for 5 minutes.

If you can't get it to work then the controller needs replacing. No need to look further.

Similar threads

Rate this thread