Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Control valve stuck on
I have a control valve stuck on so I have to turn off the main water feed. It is a Weathermatic valve and is about 6-7 years old. I've taken the top half out several times.
The solenoid appears to be working - it pulls the plunger up when energized. But I would not suspect a solenoid problem if it is stuck open.
The manual control is in the "off" or "automatic" position. And the electrical leads are currently disconnected.
I can't figure out the mechanics of the valve so I can't determine what's not working. But everything appears OK. The diaphragm is intact with one pinhole.
What would prevent the valve from closing? When re-assembling the valve, must it be "bled" to remove air?
Any help is appreciated.
Ace
SPRINKLER TALK FORUM - You Got Questions, We've Got Answers »
Help with Troubleshooting / Service / Repair »
Valves & Wiring »
