You are not logged in.

HooKooDooKu

Supreme Member

11

Friday, July 2nd 2004, 6:33am

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Why is it that most baseball fields/commercial designs with long runs, they reduce the pipe size as the run goes on? <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
To save money!

Like SamIV says, they size the pipe based on the amount of water that must flow through it (relative the how much pressure loss they can tolerate).

However, it thing the main point RVLI was trying to make is accurate...
The tiny 1/2" pipe just can't adiquately feed three sprinklers, especially since the dry run involved 1/2" or 5/8" garden hoses (lots of pressure loss when trying to push enough water to feed three sprinklers).

alaniz

New Member

12

Friday, July 2nd 2004, 2:37pm

So would I be correct to assume that if I used 1" pvc pipe for my runs and a short (5ft) 1" poly pipe from my pvc to hb, that this should work? Please advise.


Thanks
Alaniz

Rate this thread