Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Which Backflow Preventer do i need...?
I have had this sprinkler system for about a year now.....and just recently did i realize i don't have a BF preventer. I guess the guys who put my system in were trying to save money in materials. I ended up re-plumbing the whole system to reduce the heads per zone.
Anyway, i am pretty handy to Do it Yourself projects and was wondering if i can do this myself or should i have a professional come out and install it...? What determines which BF device to use on a system, or should i say on MY system. What info do you guys need from me to do an educated suggestion or recommendation..?
If you are on city water, you need to check with the city to determine what BF might be required by LAW and who might be required to install it. Some places don't mind if you install it, others required certified plumbers.
Not on City water here....im on the outskirts of town on a well. Does this help which BF device i may need?
There can still be government regulations that might (or might not) dictact what should be used (i.e. local building codes). There's a wide range of requirements. I think in most of Illinois, a certified plumber is required to at least oversee the ENTIRE instillation of a sprinkler system, other places require a building permit and a certified plumber to at least to the instillation upto the backflow preventer, and then there is where I live where the law only states that a backflow preventer of some sort be utilized (but the homeowner is free to do all the work himself).
If you're free to use any, then you have to decide which is right for you...
#1) PVB - Cheapest, but it has to be installed outdoors about 1 foot higher than any of the spray heads.
#2) Double Check - Next highest in cost. Can be installed inside/outside, above/below ground and above/below the level of the spray heads (you can place it anywhere because there is no discharge to worry about). Some do not consider it to be a safe enough device (especially if you are injecting anything into the water such as fertigation) because of the possibility of failure such as any trash in the water getting stuck in the device and preventing both check valves from properly sealing.
#3) RPZ - Most expensive and safest (I think "failure" mode is to discharge water all over the place rather than letting it backflow), but must be installed 1 foot above grade (or installed in such means that it is impossible for the device to become submerged).
Can I add a vertical double check in the basement (no need to winterize). I would also like to add fertilizer after the double check. Are there any issues I should be aware of?? Thanks!
Adding fertilizer means having an RPZ, if you want to cover all bases. It will take away over 10 psi from the system pressure, so you may have to rework the system coverage. Install a RPZ outdoors, a foot above grade, and follow its instructions carefully, come wintertime, if your pipes are subject to freezing.
SPRINKLER TALK FORUM - You Got Questions, We've Got Answers »
Help Choosing The Right Sprinkler Products »
Backflow Devices »
