low flow rate design
I would like to install a sprinkler system but my well is only rated at 6.0 GPM. Well depth is 500 ft. When the well was drilled they hit water at roughly 350 but I went the extra 150 in the hopes of getting more capacity. Im looking to water just the front yard which is approximately 60 x 120 (7200 sqft). Currently, I can run 3 rotary sprinkers in line with a standard 1/2" garden hose connected to the spigot at the incoming water supply from the well. Total garden hose length is about 150ft and i get about a 40ft diameter water pattern.
Is it possible to run a sprinkler system with these parameters? Ive seen info where 8 gpm is minimum.