You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 6585 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, May 17th 2006, 11:22am

by jlease

How many gpm is the zone?

What type heads and what is their gpm that you want to add?

Saturday, April 29th 2006, 7:34am

by jwallen2nd

Adding to existing zone

I am looking to install 5 spray heads off of an existing zone. This is coming off a 1 inch line. Can i install them all off the 1 inch line using the "funny piple"? or do i have to install them seperately off the 1 inch. The area is only 12 ft wide and 50 ft long. Thanks.