You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7146 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, October 31st 2004, 2:19pm

by nestors

Yes ,just replace the valve and heads then you will not have any troble for a while .

Nestor's

Tuesday, October 5th 2004, 7:54am

by drpete3

You should be able to just buy new spray nozzles or maybe even just clean the current nozzles. It is easy to replace the valve just go to sprinkler warehouse and buy the rain bird Asvf. then take a hack saw and cut the old pipe just under the valve buy some new fittings for the new valve and install it. Wiring is very easy too if yiou are just replacing a vale.

Monday, September 27th 2004, 6:19pm

by Tearflop

Rain Bird System ( I think)

I just purchased an old home which seems to have a 3 sprinkler head system installed. The valve system appears to be broken and I cannot seem to shut the system off when the water line is turned on...The valve looks similar to the Rainbird ASVF-series, the one I have does not have any markings on it that I can find and it seems to be alot older of a model if so. Also the sprinkler heads do say rain bird... Anyway , please bear with me if Im not making too much sense. The sprinkler heads also seem broken as the they don't spray well. They are marked 1800. What do I need to purchase as far as a new valve and new heads. Do I need the whole sprinkler spray or can I just get the heads. Any help would be appreciated.

Thanks

Tearflop