You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5691 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, September 26th 2008, 12:18pm

by drpete

RE: Water Hammer = BAD

Quoted from "Lowvolumejeff"

Sorry, but I forgo to mention that water hammer is bad. It will literally knock your system apart if bad enough, and most probably lead to a prmature failure of one or more parts.

Sorry
Agreed. you must fix the problem. Just imagine it happens while your away for a weekend and breaks a pipe in your basement. Water running for 48hrs in basement= BAD

Friday, September 19th 2008, 10:02pm

by Lowvolumejeff

Water Hammer = BAD

Sorry, but I forgo to mention that water hammer is bad. It will literally knock your system apart if bad enough, and most probably lead to a prmature failure of one or more parts.

Sorry

Friday, September 19th 2008, 9:56pm

by Lowvolumejeff

Sounds like the dreaded Water Hammer

James, sounds like you ae experiencing Water Hammer. Several causes, but sounds like your is due to the valve closing to quickly, or more corectly, having to great a velocity thru it when the last bit of the opening is closing. It is caused by a shock wave back into the main line in this case. Usual cause is too much velocity in the pipes (greater than 5 fps) and is best remedied by using larger pipes. Sometimes, changing valves can help. Please post more information about your system, size and type of pipes, type of valves, number and type of heads on a zone (or ideally the GPM the zone is using), so our answers will better suit your needs.



Another cause can be water rushing into empty (air filled) pipes. This can be remenied in diferent ways, and although I have never tried it, air relief valves have been suggested.

Good luck. Jeff

Friday, September 19th 2008, 5:52pm

by James

hard knock in water line when valves switch

How do I cure the problem of the hard knock in the water line when each valve switches zones?