SPRINKLER TALK FORUM - You Got Questions, We've Got Answers

• SPRINKLER TALK FORUM - You Got Questions, We've Got Answers »
• Help with Troubleshooting / Service / Repair »
• Not Sure What's Wrong? »
• station 1 does not come on all other stations do »

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5001 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information

Username

Subject

Message

Message

[quote='Fireguy97',index.php?page=Thread&postID=14134#post14134][color=#990033][font='Trebuchet MS']Was there any work done on your lawn this month? Can you manually turn the zone on from the clock? Can you manually turn the zone on from the valve? Do you have a manifold assembly with multiple valves in the valve box, or is each zone valve in it's own seperate valve box?[/font][/color] [color=#990033][font='Trebuchet MS']Turn zone one on from the clock (controller) for at least ten minutes. Go to the valve box and remove the wire nuts from one of the wires going to the solinoid for zone one. remove the wire connection. Touch the wires back together that you just pulled apart. If you can hear the clicking of the soloinoid, the clock is fine. That means that you are getting power to the solinoid and also that the solinoid is working.[/font][/color] [color=#990033][font='Trebuchet MS']Mick[/font][/color][/quote]

• Smileys
• Settings

Smileys

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Settings

Convert URLs

Automatically converts internet addresses into links by adding [url] and [/url] around them.

Enable smileys in this message

Smiley code in your message such as :) is automatically displayed as image.

Enable BBCode in this message

You can use BBCode to format your message, if this option is enabled.

Security measure

Security code

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, September 1st 2010, 1:12am

by Fireguy97

Was there any work done on your lawn this month? Can you manually turn the zone on from the clock? Can you manually turn the zone on from the valve? Do you have a manifold assembly with multiple valves in the valve box, or is each zone valve in it's own seperate valve box?

Turn zone one on from the clock (controller) for at least ten minutes. Go to the valve box and remove the wire nuts from one of the wires going to the solinoid for zone one. remove the wire connection. Touch the wires back together that you just pulled apart. If you can hear the clicking of the soloinoid, the clock is fine. That means that you are getting power to the solinoid and also that the solinoid is working.

Mick

• Go to the top of the page

---

Tuesday, August 31st 2010, 7:27pm

by acemac

station 1 does not come on all other stations do

HI, I can,t figure out why my number 1 station does not come on but the other 5 do. I have a rainbird ESP-6Si installed in 1994. I was working great until this month [aug]. I could use some advice on what to do to get it going again. thanks, jerry

• Go to the top of the page

---