You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5006 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, September 2nd 2010, 4:07pm

by Wet_Boots

Give this a try - use the testcocks atop the device to bleed off any air in the 825Y

-

What you describe can sometimes happen after air is inroduced into the valve, after some plumbing work, for instance. Getting rid of trapped air will greatly stabilize the behavior of these devices.

-

These devices will still vent water on occasion, especially when a high-flow sprinkler zone shuts off. As long as it doesn't get into an oscillation, you will be okay.

Thursday, September 2nd 2010, 12:11am

by Fireguy97

I don't think that you have a problem with your Febco 825Y, I think that you have a pressure/surge problem with your water. You might want to add a soft seated check valve just before your RP. It sounds like you are getting big pressure fluctuations, causing the RP to vent slightly.

Mick

Wednesday, September 1st 2010, 4:02pm

by omahamike

Problem with a Febco 825Y, help needed

Our house has a 3/4" Febco 825Y installed for our front sprinklers. Recently it started to dump water in spurts from the bottom white drain outlet. This only happens when the water inside the house is used and then turned off. Not a plumber or sprinkler installer but mechanically inclined so any advice to fix this problem would be appreciated.