You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4760 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, May 1st 2011, 7:46pm

by HoustonRN (Guest)

Having same issue with Rainbird system. Controller seems to work with display working showing correct time and day. Replaced a broken PVD Bonnet and Poppet, turned on system and everything was back to normal. About a week or two after, system will not turn on. I've tried everything and can't figure out why system sudenly stopped working. No broken pipes or leaks noted throughout property. PVD seems to working fine as well. Could there be an issue with the PVD bonnet and poppet that prevents water from reaching the system?

Sunday, April 10th 2011, 6:08pm

by Mitchgo

You possibly cut through the wiring if it was next to the sprinkler head that you replaced.

Other thoughts are a bad common wire/ connection, rain sensor active/malfunctioning. No rain sensor jumper if a sensor isn't present.

Sunday, April 10th 2011, 4:58pm

by doubleohdave

Rainbird system, controller works(?) but nothing comes on

I have a rainbird system that was working fine for a while but now no water comes on. The controller seems to work fine, but when I run the test all valves it switches through but none come on. It seems like this started after I fixed a broken sprinkler head. Any ideas?