You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4687 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, June 16th 2011, 8:09pm

by BDS

How do you close a zone valve?

Sunday, June 12th 2011, 12:42pm

by Wet_Boots

you might be missing that the zone valves were left mechanically 'open' after winterizing and they need to be returned to normal operating condition

Sunday, June 12th 2011, 12:37pm

by BDS

4 of 5 stations turn on when I pressurize the system and won't turn off

Last fall everything was working perfectly. I had a company winterize my system. When I pressurize my system now, stations 2-5 turn on and remain on until I turn off the water supply. Station 1 will come on only if I turn it on at the control panel (normal function). I went to Home Depot, and they told me it was the sylinoids, so I replaced all 5 and wired them exactly the way they were, since the winterization did not rewire my system, and the same problem persists. What am I missing?