You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4301 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Wednesday, July 25th 2012, 3:55pm

by yyu (Guest)

RE: Photos

Quoted from "texasf"

Ok, here are the photos of the two solenoid boxes and the parkway box. The parkway box is the one I think has a Febco type double check assembly.
http://s1159.photobucket.com/albums/p632/texasf/

Have you found your solution yet? I found the same issues as your posts just last week, that multiple zones are turned on at the same time with low pressure. I am living in Plano, north of Dallas. I am trying to figure out the problem and fix. It'd be great if you can share your findings/solutions. Thanks.

Wednesday, March 14th 2012, 1:34pm

by Central Irrigation

No one care to comment on the scale he pulls out of his faucets every two weeks. Tear apart the valves you can find and I'm positive you'll find the same green scale inside the valves.

Tuesday, March 13th 2012, 5:49pm

by Mitchgo

Make sure the valve solenoids are turned to the right (clockwise) until they are taught ( not super tight)

Tuesday, March 13th 2012, 2:24pm

by Wet_Boots

It is possible to replace the bonnets of those Hunter valves with flow-control valve bonnets - but have you checked first to see that none of the valve solenoids are turned to be manually opening the valves?

Tuesday, March 13th 2012, 12:44pm

by texasf

Photos

Ok, here are the photos of the two solenoid boxes and the parkway box. The parkway box is the one I think has a Febco type double check assembly.
http://s1159.photobucket.com/albums/p632/texasf/

Tuesday, March 13th 2012, 10:41am

by GatorGuy

Ahh..ok.
Thanks.

Tuesday, March 13th 2012, 10:40am

by mrfixit

I was just showing the guy how to upload a picture to the forum since this site doesn't allow enough KB's to be uploaded for most photos people try to post. They get frustrated and give up all the time.

Tuesday, March 13th 2012, 9:10am

by GatorGuy

I'm confused.
I thought the controller was Rainbird ESP-M?

Tuesday, March 13th 2012, 8:57am

by Wet_Boots

Now there's a controller 8o

Monday, March 12th 2012, 7:53pm

by mrfixit

Go to Imageshack.us and upload a pic. Cut and paste the forum code here.

Uploaded with ImageShack.us