You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4396 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Friday, April 13th 2012, 5:28pm

by Comb

Thanks to all .Ordered the Irritrol.

Wednesday, April 11th 2012, 1:30pm

by mrfixit

I'm pretty sure he says the controller is a Nelson but he doesn't know what make the valve is.
Here's the Irritrol solenoid Boots refered to.
Click Here

Wednesday, April 11th 2012, 9:24am

by Wet_Boots

Older Nelson valves of that series had a separate piece that combined with a 'standard' 3/4-20 thread solenoid to make what is sold as a single piece today - why the change, I don't know.

Wednesday, April 11th 2012, 8:24am

by GatorGuy

Signature acquired Nelson back in 2008. The most common solenoid replacement listed, the 7962, is for the 7900 and 9000 series. It's also the only one I can find listed, which narrows the options. Without knowing for sure which valve you have it is a best guess/gamble.

Tuesday, April 10th 2012, 5:50pm

by Wet_Boots

An Irritrol solenoid will be the replacement

Tuesday, April 10th 2012, 4:25pm

by Comb

Solenoid 14 Yrs old Nelson- Replacment Options.

After last year blowout ,today my one zone wont come up ,Controller says Nelson 8424, Solenoid is JH 811,valve dont know. Can i use hunter ,rainbird etc solenoid on this thing ? Secondly if not which valve should I buy ? Rest three zone r working fine .





Uploaded with ImageShack.us