You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4286 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, August 19th 2012, 2:32pm

by Wet_Boots

If you force yourself to write down exactly why you want features not to be found in standard irrigation controllers, you can make a proper choice. It is very easy to say "I want A B C and D" until it's time to pay for what you want, or when you have to comprehend the 200 page instruction manual.

Sunday, August 19th 2012, 1:11pm

by Herman

which controller

Hi all,

I'm new here (from Belgium) and have some questions on the controller for my irrigations system. I'm looking for a controller that allows me to:
- simultaneously control different valves at the same time
- have a station run different times during a day, but also for a different duration
- put on/off my waterpump

Is this possible with the current controllers available? If so, which one would i choose?

Many thanks in advance,

Herman Bogaerts
Belgium

<< Oeps...i put this in the wrong section. @administrator: can you please move this to the correct place? Thx >>