Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4250 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information

Username

Subject

Message

Settings

Convert URLs

Automatically converts internet addresses into links by adding [url] and [/url] around them.

Enable smileys in this message

Smiley code in your message such as :) is automatically displayed as image.

Enable BBCode in this message

You can use BBCode to format your message, if this option is enabled.

Security measure

Security code

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, September 28th 2012, 10:40am

by wsommariva

Thank you

Go to the top of the page

Friday, September 28th 2012, 9:00am

by Wet_Boots

Correct

Go to the top of the page

Friday, September 28th 2012, 8:57am

by wsommariva

Blowing out Hunter equipment

Hi everyone,

Hunter PGV valves and Prospray PRS with check valve.

Am I correct that I can use the solenoid to open the valve to blow out the zone? And that the bodies with check valves have no special requirements?

Go to the top of the page