You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 7663 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Friday, May 16th 2003, 2:39pm

by Rays Sprinklers

Is the pipes leaking, or do you mean that the valve is leaking and allowing water to flow through the lines. What valve is it??

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Tuesday, May 6th 2003, 4:31pm

by RVLI

Did you try replacing the solenoid? How much male thread can you see sticking out of the valve where its leaking, or is the valve itself leaking?

Tuesday, May 6th 2003, 3:47pm

by griddeath

Zone problem wont turn off

One of my zones comes on normally but wont shut down- have to play with valve and solenoid cover to get it off and even then it leaks slowly. any ideas is the valve shot- tried cleaning it out but to no avail. it is robbing pressure from the other zones so I have had to cut it off but I suspect it is still leaking slowly anyway

Tuesday, May 6th 2003, 3:47pm

by griddeath

Zone problem wont turn off

One of my zones comes on normally but wont shut down- have to play with valve and solenoid cover to get it off and even then it leaks slowly. any ideas is the valve shot- tried cleaning it out but to no avail. it is robbing pressure from the other zones so I have had to cut it off but I suspect it is still leaking slowly anyway