You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3592 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, July 20th 2014, 2:43pm

by Central Irrigation

The only time the program switch matters is for programming and MANUAL watering, in which you would need to select a program to water. Like Boots stated, position of program switch is irrelevent for AUTOMATIC watering.

Sunday, July 20th 2014, 2:34pm

by Wet_Boots

ALL programs operate - remember that and you'll be okay

Sunday, July 20th 2014, 12:47pm

by 95mmrenegade

Quoted from "Central Irrigation"

It is possible. Set up program A to water zones 1-5 on your chosen days. Set up program B to water zones 6-10 on the other days. Make sure not to overlap watering times so that program B is trying to water while program A is.
If the selector switch stays on program A, will it still run program B or once you program A,B,C they all 3 run at the programmed times?
Game plan would be to
set program A to run zone 1-5 at 5:00am and water deeper(MWF)
Set program B to run zone 6-10 at 5:00am and water deeper (TTS)

Sunday, July 20th 2014, 10:47am

by Central Irrigation

It is possible. Set up program A to water zones 1-5 on your chosen days. Set up program B to water zones 6-10 on the other days. Make sure not to overlap watering times so that program B is trying to water while program A is.

Sunday, July 20th 2014, 10:30am

by 95mmrenegade

Rainbird ESP-M with 10 zones trying to split day watering

I am trying to find a way to program my Rainbird ESP-M so it waters 5 zones on Monday and 5 on Tuesday. Right now it takes about 5 hours to water all of the zones and I am starting it around 3:30am. Trying to break it up to start it later but water half(1-5 && 6-10) on alternate days. Is this possible?