You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 448 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The first post

Thursday, April 15th 2021, 9:03am

by raymadigan

System won't turn on

I attempted to turn on my sprinkler system this spring and for somenreason, i was unsuccessful. The system has been running successfully for over 25 years.

When I opened the valve I didn't hear the customary surge of water filling the pipe.

If i press a rod into the brass quick connect, water sprays out. If I attempt to turn on a valve in the first manifold, there is a dripping of water, but there is no real volume or pressure.

I check the water meter and the usage volume does not increase.

Does this mean there is a block somewhere between the valve and the first manifold?