You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Tuesday, June 22nd 2021, 5:55pm

by pepsigrandpa (Guest)

Really appreciate the input. I will go for pricing.

Monday, June 21st 2021, 3:20pm

by Wet_Boots

Your idea works better with city water.

Depending on your pump setup, you may still run into issues if the hose demand is too low to match the pump output. An above-ground jet pump would be able to endure a mismatch, but a deep-well submersible pump could get into big trouble, because their no-flow pressure could do some $eroiu$ damage (said damage being avoided with a pressure tank and pressure switch control)

Consider the conversion to pressure tank operation, at least to the extent of pricing the job. Over time, it might be worth it.

Sunday, June 20th 2021, 6:41pm

by pepsigrandpa (Guest)

I think I'll just add another zone. Tie it to a spigot and turn it on and off as needed.

Friday, June 18th 2021, 9:50am

by Wet_Boots

If the system supply is not continuously pressurized, as with city water, then that has to be changed before you consider adding a hose bibb. This can run into hundreds of dollars of pump controls and pressure tank.

Friday, June 18th 2021, 7:06am

by pepsigrandpa (Guest)

I understand that it is not a brand thing. I don't understand how to get a pipe under continuous pressure. That would mean the pump is always running unless a pressure switch is used? I guess I could really used a schematic of the system. Any idea where to find one?

Wednesday, June 16th 2021, 3:02pm

by Wet_Boots

This would have nothing to do with brand names, and would have everything to do with the plumbing of the system having a pipe under continuous pressure that feeds the hose bib.

Thursday, June 10th 2021, 2:14pm

by pepsigrandpa`

Adding a water spigot to an existing system

My Neighbor has a Hunter system with a separate water spigot that has water available all the time. I have a rainbird system and would like to add the same feature. My neighbor does not need to activate any zones to get water from the spigot. How does that work and how can I add one to my system?