You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 6836 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, August 15th 2005, 11:38am

by Wet_Boots

Just locate the valves and heads. The rest will have to take care of itself. No one ever denied themselves landscaping because of potential sprinkler damage, and repairing/rerouting sprinkler pipes is just part of the process.

Monday, August 15th 2005, 10:53am

by Vespidie

Landscaping. The yard is, for the most part, treeless, plantless, etc. Will eventually want to minimize the amount of grass cutting that is currently taking place now. I'd rather be proactive -vs- reactive when it comes to the unknown. Reactive procedures too often lead to frustration, making me an unhappy home owner.

Wednesday, August 10th 2005, 7:50am

by drpete3

Just curious but why are you trying to find the lines?

Monday, August 8th 2005, 5:03am

by Vespidie

locating existing irrigation system lines

I recently purchased a home with an irrigation system, however the seller couldn't locate the drawing showing the system layout. I was told the system hadn't been used in about 2 years also.

Not being familiar with irrigation systems, can the layout be "located" similar to the public utilities before one digs?

If the system can't be located by automatic means, I assume that the "hit and miss" method of location is my only alternative.

TIA