You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 6803 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, September 11th 2005, 6:03am

by hken

I can try to turn it around, however the other 2 valves are installed the same way I installed this one. The problem started when that line would not shut off at all, manually or electronically. I had to shut off the main valve, now I just can't it to work. Thanks for your reply.

Sunday, September 11th 2005, 4:30am

by SprinklerGuy

Valve installed backwards????
Plugged lateral line?
I lean towards valve installed backwards.

Saturday, September 10th 2005, 3:00pm

by hken

One line will not turn on

I have one line that refuses to turn on. I have replaced the entire manifold (3 times). The sprinklers will not come on manually or electrically. There are 2 heads that slowly leak. When I turn one the main water sometimes that line will spring into life all on it's own, then I manually turn the sprinklers "on" and they turn "off", go figure. Is this a pressure problem? Doesn't appear to be a broken line.