You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 6249 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Monday, March 26th 2007, 2:43pm

by Dick

Guess I need to call a repairman...I am lost with all this. Appreciate your help, but just don't understand the lingo or layout.
Guess that's why I do what I do, and sprinkler people do what they do...

Thanks for all your help.

Sunday, March 25th 2007, 10:23pm

by Wet_Boots

Is there any backflow preventer on this system? A BP is one point where a testcock or drain could be opened.

Sunday, March 25th 2007, 3:02pm

by jmduke7

What Boots means is to open a valve, or something in line to relieve the pressure and amount of water in the main line. If you do not know of any, try opening a valve (one of your electric control valves) manually. You can do this by twisting the solenoid on your valve or the manual external bleed (if available on your make / model) and that will relieve any pressure in the line. Although it is not as thorough as a drain, it should suffice.

Sunday, March 25th 2007, 2:40pm

by Dick

I've shut the system off at the box near the curb (two spigets). I do not understand what you are saying when you mention "open a drain"?

Sorry, I am a novice, and very much appreciate your help...

Dick

Sunday, March 25th 2007, 1:58pm

by Wet_Boots

Electric shutoff (controller) is meaningless. Think mechanical. Shut off the flow of water into the system, and open a drain.

Sunday, March 25th 2007, 1:51pm

by jmduke7

When you say " box" what do you mean? Is it the controller that you are referring too, or the valve box where the shut off valve is located?

Sunday, March 25th 2007, 11:36am

by Dick

Be my, by me, whatever...sorry. It was that 2nd glass of red that didi it.

Sunday, March 25th 2007, 11:35am

by Dick

Sorry for the typo...should have read "be my" instead by me....

Sunday, March 25th 2007, 10:58am

by Dick

Thanks folks...will try letting it dry for another couple of days, and see what happens. Can I assume by your replies, that it could indeed by my sprinkler system, EVEN WITH THE SYSTEM SHUT DOWN AT THE BOX?

Sunday, March 25th 2007, 7:06am

by Wet_Boots

A sprinkler shutoff valve could have a slow leak, so turning the handle wouldn't accomplish anything. You'd also need to open a drain on the system, so that water could drip out, upstream of the pipes in the yard.