You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3545 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Sunday, August 24th 2014, 3:39pm

by Wet_Boots

Just keep in mind that this is like pushing a peanut up Main Street with your nose, given the low cost of materials it takes do the job in the customary fashion.

Sunday, August 24th 2014, 2:20pm

by Terryinclass (Guest)

Thank you both, I'll report back. I figure I have nothing to lose by trying a couple of different things. Consider it a field study. :)

Sunday, August 24th 2014, 11:01am

by Wet_Boots

Nothing will ever securely glue to that kind of tubing, so either let it drip anyway, or cut and patch the tubing with conventional fittings.

Sunday, August 24th 2014, 7:59am

by Central Irrigation

I've seen many failed attempts by homeowners who used duct tape, electrical tape, or the likes. Typically it results in having to cut out the unwanted section and replacing with blank tubing (drip line that doesn't have emitters). Can't say I've seen epoxy over the emitters.

Sunday, August 24th 2014, 12:39am

by Terryinclass (Guest)

Clarification

Just wanted to clarify that the factory-installed emitters can't be capped with a goof plug. The holes are just large enough for water to weep through, and way too small for a goof plug.

Saturday, August 23rd 2014, 7:13pm

by TerryInClass (Guest)

How can I close some emitters in a dripline?

I have an existing installation using 1/2" dripline with factory-installed emitters every 18" or so. We have moved some landscaping around and no longer need all those emitters to be active, but want to take advantage of the installed line to install our own above-ground emitters.

Is there a recommended approach for "sealing" the emitters that we no longer need? I'd hate to have to cut out all the line segments that have emitters and replace with couplers. Could it be as simple as a drop of glue or epoxy in the emitter?

Thanks!

PS Sorry if this has been covered, I searched the forums but couldn't find anything.