You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The first post

Wednesday, May 17th 2023, 7:52am

by Guybilly

Hunter flow meter issue

Just installed a new Hunter HC flow meter with a 1" NPT thread. Water source is a well. I have a Hunter Hydrowise controller. My issue is that the Hydrowise controller is reporting flow rates in the 3000 Gal/min, which is obviously off by a factor of 300. When i setup the sensor in the Hydrowise software, I selected the sensor type as a 1" flow meter. There is a type listed for a US Hunter HC flow meter, but it is grayed out so it is unselectable. What have i done wrong, or is the meter defective?